LabPac® Solvent Extract 75i 1-Liter (0301196)
$17.00
LabPac® Solvent Extract 75i
Pre-mixture 75% IPA, 25% De-Ionized H20 (1 Liter)
Description
The OmegaMeter uses a wash solution of 75% by volume of ACS reagent grade isopropyl alcohol (IPA) and 25% by volume of deionized distilled water.
This “wash” solution is also referred to as the “Test Solvent” or “Extract Solvent” as its purpose is to wash off, or extract contaminates from a circuit board.
You initially fill your ionic test equipment with this Test Solvent.
The solution concentration in the equipment (Alcohol/Water Ratio) may eventually change due to evaporation and the level may drop due to drag on the tested assemblies.
You will use 99% IPA and pure deionized water to adjust the concentration when necessary to bring it back into compliance. The ionic test equipment generally has a menu-prompted procedure to accomplish this.
Once the concentration is brought back to the 75%/25% compliant level, then use this pre-mixed Test Solvent to bring the level of fluid to the full mark.
Material Safety Data Sheet (MSDS) for the Solvent Extract Solution (pdf)
| AMOUNT IN BOTTLE | 1 Liter |
|---|---|
| AMOUNT USED PER OMEGAMETER | 30 – 42 liters (8 – 11 gallons), depending upon test cell size |
| SOLUTION RATIO | 75% IPA – 25% D-H2O |